|
|
|
|
|
 |
2-phase steppermotors : (hybrid) - step angle : 1,8° (0,9°) - sizes : 28 - 106 mm - torque : 0,032 - 19 Nm - winding : unipolar - bipolar / 4, 6, 8 wires - advantages: simplicity/ standardisation / accuracy / pricing - applications : in several domains More information : www.sanyodenkieurope.fr |
| 3-phase steppermotors : (permanent magnet / hybrid) - step angle : 1,2° (3,75°) - sizes: 42 - 60 mm - torque: 0,9 - 1,68 Nm - winding : star / 3 wires - advantages : small step angle / smaller torque ripple / less vibrations / pricing / accuracy - applications : e.g. copiers and scanners More information : www.sanyodenkieurope.fr |
 |
 |
5-phase steppermotors : (hybrid) - step angle : 0,72° (0,36° - 0,45° - 1,37°) - sizes : 28-106 mm - torque : 0,026 - 16 Nm - winding : pentagonal / 5 or 10 wires - advantages : small step angle / smaller torque ripple / less vibrations / high accuracy - applications : very demanding applications More information : www.sanyodenkieurope.fr |
| Synchronouos motors : - speed : 60 RPM at 50 Hz (72 RPM at 60 Hz) - sizes : 56 - 106 mm - torque : 0,57 - 5,2 Nm More information : www.sanyodenkieurope.fr |
 |
 |
Performance servo : Basically these are steppermotor with incorporated encoder. - sizes : 28 - 60 mm - resolution : up to 12.800 steps/rev. - torque : 0,036 - 1,2 Nm - advantages : closed servo-loop - applications : "short stroke, high hit rate" More information : www.sanyodenkieurope.fr |
| Permanent magnet Tin Can stepping motors: - diametre from 25 till 55 mm - step angle: 7.5 and 15° - unipolar and bipolar - with or w/o gearreducer (ratio's from 5:1 till 900:1) - holding torque (w/o gearbox): from 8 till 270 mNm - customised models for OEM customers More info: http://www.nipponpulse.com/products/motors/tincans.cfm |
 |
 |
Synchronous motors: - diameter from 25 tii 55 mm - with or w/o gearbox - synchronous speed at 50 Hz: 250 or 500 RPM w/o gearbox and from 1/1440 up till 60 RPM with reducer More info: http://www.nipponpulse.com/products/motors/synchsteppers.cfm |
| Linear stepping actuator: - stepping motor with built-in spindle - internal or external nut - forces up till 150 N - resolution: 0.01 mm/full step More info: http://www.nipponpulse.com/products/motors/LinearStepper.cfm |
 |
 |
Linear stepping motor: - resolution: 5 or 2.5µ - speed: 1.5 till 2 m/sec - typical acceleration: 1 g - guiding: bearings or hydrostatic - stroke: up till 1470 mm in one piece, otherwise modular More info: http://www.baldor.co.uk/products/linearproducts/lmss.asp |
| Dual axis linear stepping motor: - a slider moves on top of a platten in 2 directions - resolution: 2.5 µ - flatness of platten: 12.7 µ per 300 mm - guiding: bearings or hydrostatic - max stroke: 1498*914 mm More info: http://www.baldor.co.uk/products/linearproducts/lmds.asp |
 |